*A SuperCard DSone With the Error "PSram Error" (Hold L+R When you Turn DS to enter self test mode)*A DS to play it on
*A plain ScrewDriver thats realy Realy Thin (The ScrewDriver on the Right)
*A Star Shaped Screw Driver Thats small Enough to Screw the Bult on the Back of your SuperCard (The ScrewDriver on the Left)
*A Peice Of Paper (Im using my Expired Day Pass)Step 1
At The Back of your SuperCard There is a Bult that you have to take out. You have to Screw it Anti-Clock Wise / Left.Make Sure you put the Screw Somewere Realy Safe Becuase if you loose it, Theres Going to Be Problems.*Note* Take out your Micro SD card First before you Start doing Step 2Step 2
This is were you Use the super thin plain Screwdriver. The Idea is to take of the face Off the Supercard as seen on the Image Above.Step 3
When your Done it should look something like this (Image Obove), Now you have to be Gental and take of the Face Off because theres those little hooks that easly break off so be Gental (You can take The back off insted, It makes no Difference).Step 4
Now When youve taken out the Face it should look like this when put aside each other. Now Since the face is off put the back somewere safe for the momenet, All you will need now is the Face. Now what you do is Take off the SuperCards Board out of its Resting place. be Carefull because, you will obviously feel Resitance Like if the Board is Glued on but its not its just Sticky, very so take it off slowly From the Edges untill it pops out.*Note* the board has a hole in the middle were the Bult that you took off on step 1.Step 5
Now that you took of the Board Comes the Creative part. on the Face (Not the SuperCard Board) There is like a hole. well if you dont see it now, Dont worry you will in a sec, well what you do now is put the Board Yet again somewere safe.*Note* Try not to touch the board on the middle Circuits, Try to Grap it around the Courners.Step 6
What you Do is Cut out a little bit Of Paper and Fold twice and you should end up like this, around this hight and lenth
*Note* Dont Make your Peice of Paper Very Think Becuase it will then be hard to Place Your Card Into your DS and you dont want that. Try to make you Paper nice and Thin and it has to be folded twice so that it works.Step 7
Now Remeber that Hole i was telling you about on the Face well here it is, You Place that Peice of paper that you just made and place it here.*Note* This is the Sticky part.Step 8You Put Everything back together and then test your new Moded SuperCard DSone. (Go through the Walkthrough Backwords to put the SuperCard Back into Place).Have a Good time and Remeber, Be Carfull and Gental with your Work on this.If You guys got any questions ask me and il try to help out. BTW i can only help out with what i have so only Supercard Questions please. Thank youFrom The RomUlation Homie1Blacks1