Problems booting burnt GC games on a softmodded wii

I recently installed DIOS MIOS in order to play GC games from my EHDD, that plan got a large bump due to the tutorials being very vague about stuff and me screwing up badly.So i decided i want to play my GC pirated games while i wait, i cannot boot them at all, neogamma crashes, i cannot do it directly from the wii menu.So i ran out of options, if there is more info i can provide i'll run dop ios and upload the .txt.I am running the latest rev of Dios Mios, and CIOS 247, 248 and 249 dx2 V10.

I have USB loader GX installed on my wii, all I did was just installed Dios Mios and Dios Mios lite both, seams to work this way.The ISO just ran from the SD SDHC card, but you need to put files in games/XXXX/game.iso has to be done like this.XXXX replace it with GamesID 4 letter, games folder / GameID folder / game.ISO , (Note) Game has to be renamed just gameI have stuff on my PC at home, will look into the files I used 4 U, later.-----------DIOSMIOSLite_2.10.wad was it as well as Dios Mios

Replying to #2

So basically Dios mios lite removes the possibility to launch backup discs?

Replying to #3

O miss read, you want playing backup burn onto disc games, somethink have not tried yet myself.But much easier to play as ISO .Should be many youtube videos though .

Replying to #4

I am going to play from USB, the problem is that it's going to be a loooong pain in the ass because i need to make folders with [Game Title Game ID] and there are over 40 GC games.

Replying to #5

I see, wow that is a lot ;DIf you have a hex edit program easier by , just drag and drop the game onto the program, and ID is in top left corner of hex.My Zelda collection game ID is PZLE sogames/PZLE/game.iso

@Jhon 591@ Thanks! I also figured what the problem is, DIOS MIOS and DIOS MIOS Lite do not support launching games from backups , only via USB or SD card.

Replying to #7

I see no problem :) , Sorry backups not work.Anyway after a bit of digging about found DIOSMIOS 2.10.wad 4 USB not Lite SD :) But can only be used on Port 0 USB bottom port.Now can play my games of USB.DIOSMIOS 2.10.zip , DL from https://mega.co.nz/#!lEIwwRbI!hKtjB7lomSPpNPlQFn23VY6Ju2Qnh0I4qhEqmmWluds

@Jhon thanks a lot, i am waiting for the program i use to turn .iso to .wbfs finishes, it's going to finish on a few hours, you wouldnt believe how difficult is to find a loader that supports NTFS along FAT, FAT 32 and the Ext formats.Post Merge: [time]1399667037[/time]Jon do i really need to put all the names of the games as game.iso?And by any chance you have a tutorial on how do i need to set up the wii partition for configurable usb loader?

Replying to #9

I don't think the USB loader has any think to do with loading gamecube games, but wii games yes.-----------gamecube games Looks like , I try one game with name and just did not work, added into ID folder as game.iso and it worked.------------Wii games, Just figured out from bit here bit there of google , What I got when't through.My Flashdrive is USB FAT32 for isos , but need to be used with WBFS Manager to format and add the isos onto it.http://forum.romulation.net/index.php?topic=56513.msg1442080#msg1442080--------------Files from Here: http://www.sendspace.com/file/7w5qxuLike to do thishttp://www.youtube.com/watch?v=gKPEgwbCFa8I wanted to make sure as "I Do not have Wifi at home"Here are the instructions for offline

(1): Pass the contents of the folder "files" to the root of your SD card.
(2): Disconnect any Memory Card or GCN Controller. THIS IS IMPORTANT.
(3): Insert the SD card on your Wii and run Homebrew Channel (The homebrew must be 1.0.7 or higher)
. Run "IOS236 Installer/ Uninstaller"; Press 1 to install IOS236 and wait for a message on the screen
"Getting IOS36 revision 3351". Now, select the option "Load IOS from SD card". When the installation
finish, press any button to return to the HBC.
(4): Load the "cIOS rev20b Installer" app and choose the IOS 236 on the first screen using the D-pad
and button A. On the selection of IOS Base, choose the "IOS56 v5661", then "IOS 249", then
"WAD Installation" and then, "Wii SD Slot". When the installation finish, press A to continue
with the process. Now you'll have to install the IOS 250. Now you´ll have to select again an IOS Base,
so select the "IOS38 v4123" and then "IOS 250" (instead of IOS 249). Also, choose again
"WAD Installation" and then "Wii SD Slot". When you finish, press the button B to return to the HBC.
(5): NOTE: NOW, IS THE INSTALLATION OF THE CHANNEL. IF YOU JUST WANT TO LOAD IT FROM HBC,
YOU CAN SKIP THIS STEP. IF YOU WANT THE CHANNEL, FOLLOW THE NEXT INSTRUCCTIONS. On HBC,
run WAD Installer 1.7. Then press A to continue, and select "IOS 249". Select "Disable"
for the NAND option, then "Wii SD Slot". Search the folder "wad", then, select the
"USB Loader GX-UNEO_Forwarder.wad" and install it. When the installation finish,
press B and then HOME to return to the Homebrew Channel.
(6): Now, you can load the USB Loader GX from the Wii Menu or the app on HBC,
but your SD card must be inserted to load the channel. Why? Becuase is a Forwarder,
that run the application from SD card. I f you want to get ISO's, go to: wiiso.com,
to install a videogame, insert the Discand select "install" and that's it.You will need
WBFS Manager 3.0 to put the ISO's on your HDD or USB.HOPE THIS HELP. I'M NOT RESPONSIBLE IF THIS BRICK YOUR WII. ALL TRASLATED FROM SPANISH TO ENGLISH.
TAKE YOUR OWN RISK!

And i was wanting to avoid having to perform a formating to WBFS, i only installed it because i read it could boot wii games from NTFS and going by what Necro/Xerinna told me nearly two years ago.Fml.