Back to Computers & Modding

my pc is messed up -_-

-a55-OP
#1
yeah well basically when i turn it on it seems to be normal, but the cpu fan seems to be spinning way faster than normal, the screen stays black with a "no signal" thing and it never get's past that, any ideas on what the problem is? the pc has had some overheating issues in the past. its a intel core 2 quad Q6600 if that helps.
Loonylion
#2
are there any beeps?
timmy1991
#3
all I know is that when I get the no signal thing, it means the plug for my monitor is loose on the PC... might be part if your issue
-a55-OP
#4
nope no beeps, if there were i would have know what to do, anyway i seem to have fixed the problem, i dont know what i did but it worked... thanks for the atemted help.
failtorespond
#5
Good to hear that. Usually that could be a bad sign :(
waylonn
#6
Could be a plug touching the wrong port
i.e. Microphone plug touching USB port
(might crash pc)
nomercy
#7
No signal = pc is off or not booting.
No beeps = pc is off or not booting.
Fan spinning and no signal/beeps = pc is not booting due to booting issue.Must have been some grounding issue (some short-circuit somewhere). Good that you solved it. Figure out how you fixed it, because you might encounter it again.
adamozomg
#8
get a mac.
branraf
#10

Replying to #9

Haha oh my god, easily the best reply i've heard in ages, that's going in my sig :D But anyway if you've knocked your machine lately that may have knocked something out of place, i did it with mine and it cause such a bitchy shorting issue, can you guess how i fixed it ::)
Showing posts 1–10 of 10 · This discussion is archivedBack to top