Back to Computers & Modding

Microphone...

meganovaOP
#1
I've bought a microphone,
It only have 2 connector(green and pink),and without cd.
I'm using my second CPU.It have 6 jack behind it.
Can someone teach me how to use it?
(I'm thinking to use it with no$gba) :-\ ;D
Blade5406
#2
Your sound panel has six colored ports, right? Why don't you just plug-in the green connector on the corresponding color and also the same with the other connector?
meganovaOP
#3
Yep,I've already do that.
But when I turned it on..and speak..I didn't hear any voices...
Blade5406
#4
Open up your Audio manager and turn them all to max, then try it out...
meganovaOP
#5
It's already maxed,and still,no voice coming out..
Blade5406
#6
There's something wrong with your system unit's back panel then....why not try the front panel then...almost similar problem for me too...my speaker stopped working (no darn sound coming out )... I had to plug in the headphone+mic just so I can listen to some audio....
meganovaOP
#7
Oh,wait..
Do I need to connect to green one to the speaker?
Blade5406
#8
If you need to (if your speaker is working fine).... I removed my speaker (it's not working) and just plugged in the headphone...and there should be a green audio port either in the back or front panel...it consists of this colors(mine):
Back Panel:
Orange
Black
Grey
Blue
Green
Pink/RedFront Panel:
Green
Pink/Red
meganovaOP
#9
Same as mine.but I don't have the Front panel.
Do I need to configure it on control panel?
Blade5406
#10
I also don't have the front panel :P....Just try and tweak some of the settings in your audio's main control panel...Screenshot...
evildonkeys
#11
here an idea (but i forgot the rest i think sorry) anyway go to "start" then right click on the "computer" then "properties" and then try to find a word "device maneger" then click on the sound and see if u have a yellow question mark on it and if u do umm......thats the part i forgot sorry i wasnt that helpful :-\
meganovaOP
#12
no question mark in the "Device Manager"
Blade5406
#13
Hmmm...could you remove the headphone then plug in your speaker...then see if it works...?
bhatooth
#14
on your volume control is there a microphone option if no then click properties at the top then select microphone hope that helps
meganovaOP
#15
Where I can find volume control?
Loonylion
#16
start -> run -> sndvol32, then if no window comes up its a speaker icon in the systray
meganovaOP
#17
No microphone option there,
All I can see is realtek HD output and Input.
Loonylion
#18
input is microphone usually
meganovaOP
#19
I have checked all the boxes in the input option,as well maximized the volume,but still,i can't hear any voices....
Showing posts 1–19 of 19 · This discussion is archivedBack to top