James Cameron's Avatar unplayable

I am having a problem with playing James Cameron's avatar and any help would be apreciated.
I have tried several things on romulation but they don't seem to work.
Thanks to any contributions.

Please read this thread.
https://www.romulation.org/forum/index.php?topic=1736.0And this thread.
https://www.romulation.org/forum/index.php?topic=1462.0

I'm sorry. OK lets see...
I have v1.18 R4 and the game says:
error code:-4
system halt!
After removing everything and putting it back on again, it goes white when I load it.
I have read the common issues etc. before but they do not help in anyway.
And thanks.

Try using Ysmenu.
https://www.romulation.org/forum/index.php?topic=27617.0This contains the 1.18 R4 firmware, and the files for Ysmenu. You start up Ysmenu.nds from the game menu and it will boot into the Ysmenu system. Then you play the games that won't work in just 1.18

Thanks for the help, but unfortunately it does not work.
After starting the YS Menu, I selecetd the game but it says:
load rom errcode=-4 Please reset system

Re: James Cameron\'s Avatar unplayableYou need to use 'YSMenu' in conjunction with the latest version of the DSTT software ... that is version V1.17a12. It works fine with that combination.
Post Merge: [time]1260778486[/time]
Here is the link for the download ...http://www.mediafire.com/download.php?ul242aqmgtj

The exact same problem persists, or am I doing something wrong?
I merged the TTmenu with my current one and replaced everything.
I ran the YSMenu NDS but the game (avatar) did not work.
Thanks for the help

I have just zipped up the O.S. off my own R4 card, so here it is. Just copy this to your card (overwrite everything) and then add the rom to the games folder .. it works for me every time !!!http://www.megaupload.com/?d=8UXTAHDM

Re: James Cameron\'s Avatar unplayableThanks, I'll see if it works
Post Merge: [time]1260871548[/time]
The game works now!
Thanks again!

where do you get this rom from?

I use DSTT with 1.17a12 and YSMenu but it don't work (Error Code 5). Any suggestions?

I got it here: http://rs484.rapidshare.com/files/316404508/4529_-_James_Cameron_s_Avatar_The_Game_-En-DSi_0022.rar

Replying to #12

Is it patched?

I don't know, It works fine though.
Apparently though, this version is patched:
http://nds.naspev.com/2009/12/dsi-0022-james-camerons-avatar-game-usa.html

Hi Every body.
I have just downloaded the new DSTT firmware, update is dated 21/12/2009.
here is the site for the download.
http://www.happydone.com/download.htmlI have tested it on Avatar, Rabbids go home, Assassins Creed II, and Battle of Giants Dragons.And I can confirm that they are all working ok on the Original DSTT card.
If you are having trouble then could it be that your card is fake? :-\

could someone tell me how to play it on r4???????

it doesnt work

What happens ???I have tired it out on THREE different R4 cards and it has worked fine on them all .. perhaps your copy of the ROM is faulty.

Re: James Cameron\'s Avatar unplayable

Replying to #19

He is using ysmenu for R4, and not the kernal v1.18Having both firmware's on the same R4 can be helpfull sine ysmenu can run some of the AP games, check list hearhttp://gbatemp.net/index.php?s=25692f298c20c4404e8e58b3f55c3acf&showtopic=195808&st=0&start=0
Post Merge: [time]1261667098[/time]
Its on the list as fixedhttp://www.happydone.com/download/57-dstti-a-dstt-refixed-ttmenu.htmlHear is DSTT v1.17a12 for R4DSTT v1.17a12 For R4 Original Usershttp://www.megaupload.com/?d=ZX8FT3AC