I have a question regarding the EZ Flash 3 in 1

Do I have to worry about Anti Piracy when it comes to GBA Games?I ordered my EZ and it should arrive by Thursday or Friday so I'm just wondering.

Nope. Most if not all games should work. If none do, it has completely nothing to do with Anit-Piracy.The EZ Flash V 3 in 1 is a great Slot 2 device, and you won't regret purchasing it.

While there isn't any anti-piracy in the GBA games, there are hardware incompatibility. Like the clock and I believe solar sensor. I think you have to patch the games to work correctly with it.

There are also problems with files over 16 mb.

sexywogboy · #2Nope. Most if not all games should work. If none do, it has completely nothing to do with Anit-Piracy.The EZ Flash V 3 in 1 is a great Slot 2 device, and you won't regret purchasing it.

Really?Thnks for the info.Well I'm waiting for mine to arrive so I'll just be chilling.Another question don't I move my GBA Games to my Micro SD that goes in my Flashcart to play the GBA games on the EZ?I have an Acekard 2i and I see it can be used as a passme to play GBA games as long as I have the slot 2 device.So all I need to do is move my GBA Games to my Acekard2i and boot up the EZ to play the GBA games correct?

TirithRR · #3While there isn't any anti-piracy in the GBA games, there are hardware incompatibility. Like the clock and I believe solar sensor. I think you have to patch the games to work correctly with it.

Really?I'd better look into it then.Thnks :)

Replying to #4

How come?

It can only read upto 16 MB. There are a few 32 MB games out there that therefore won't run, sadly. (Found that out the hard way with mother 3.)

Replying to #6

Well that's a relief (Sorta)Since most of the games I want to play is 16MB and below.I thought at first you were saying it cannot play games up to 16MB.

AnimeboyX3 · #5Another question don't I move my GBA Games to my Micro SD that goes in my Flashcart to play the GBA games on the EZ?I have an Acekard 2i and I see it can be used as a passme to play GBA games as long as I have the slot 2 device.So all I need to do is move my GBA Games to my Acekard2i and boot up the EZ to play the GBA games correct?

Yes. You put the GBA ROM's on your SD Card from your DS Flashcart into a folder named "GBA".

Invghost · #6It can only read upto 16 MB. There are a few 32 MB games out there that therefore won't run, sadly. (Found that out the hard way with mother 3.)

That's not really true. You can run 32MB games, you just have to run the games from a different part of the EZ 3in1's memory. I don't know about the Acekard 2i firmware, but because I use an R4, I have to use a piece of homebrew to launch my GBA games. It's called GBAExploader and it's really useful. It allows you to choose how to load the GBA game (which type of memory to use). So to recap (and tidy up my messy post) to run games bigger than 16MB then you have to make sure you load the games into the right part of the memory, using either your firmware (I guess it should support this) or GBAExploader.

Invghost · #6It can only read upto 16 MB. There are a few 32 MB games out there that therefore won't run, sadly. (Found that out the hard way with mother 3.)

Replying to #9

And I played some fire emblem game that was 32mb...however...I have a feeling my slot 2 card, while it works the same as an ezy 3 in one, it's not actually an ezy 3 in one...I'll have to find it before confirming firstly.