Back to Technical Help

Ecclesia and the M3 Sd card problem

OP
#1
Hello!I've got a problem here;
I tried to play OoE, but it won't load on my nintendo DS.This is how my DS runs:
1). you see 8 pictures, one of them is a game-controller;
2). when I press the controller, I see the castlevania game (It even shows me the official picture that goes along with this game)
3). there are two ways of starting a game: by pressing start (open demo) or by pressing a (open game)
4). after step 3 you get a different screen where you press a or start (both have the same effect now) to start the game...a red bar can be seen showing you it's loading the game.Now when I use "a"to start the game (open game) I get a black screen and that's it...it won't load any further (believe me, I've waited 15 minutes:P)
When I use "start" to start the game (open demo) I get a black screen, followed by a white screen...and this too, won't load any further (again, not even after waiting 15 minutes...)I did everything I could find on the internet regarding this game, namely:Using Gameware version 36a
Firmware version 35 (normal one, not a bèta in another language)I've written my rom (the venom one) with "trim rom", "4x DMA" and "software reset"
According to m3wiki.com, these are the correct settings for this game...I use an M3 SD card, with a sandisk 2gb SD card.
I have an "old/regular" nintendo DS
I never had any trouble playing other games (last game I playes was Zelda; phantom hourglass)my m3 card looks like this:
http://n-europe.com/featuresgfx/m3review/m3sd/m3sdcardhalf.jpgmy passkey2 looks like this:
http://www.gbatemp.net/staff/qrayzie/review/m3sd/1015.jpgAnd this is what my SD card looks like:
http://www.tracyandmatt.co.uk/blogs/media/blogs/tracyandmatts_blog/sandisk-2gb-sd-card.jpgI'm 100% sure I have the right Rom, because it works with most of the people here.Sorry for any grammar/spelling errors...I'm Dutch, not English...Please help me:)
OP
sorry for double post...I already checked the stickies, and the only thing I could find about white screens is regarding the GBA, not the NDS...also, I've had white screens back when I just had the M3, and that was because I didn't "write the game" with gamemanager...I write games with gamemanager eversince and never had any problems...
also, I'm 100% sure I did just like the m3wiki said...and that has always worked for me.
Showing posts 1–2 of 2 · This discussion is archivedBack to top