Back to Technical Help

Duke Nukem: Critical Mass (EUR) AP

Jonez001OP
#1
DA ROMWhen you report be sure to add all of this information:- Card
- Firmwire + version
- ProblemTo make it easy:

Card:
Firmwire (version):
Problem:
Works?
AP:Black screen
Graf. glitchesFIXES:DSTT & YSmenu
Jhon 591
#2
Loads and runs on WoodR4 v1.28, AP yet unknown
Post Merge: [time]1302110687[/time]
DSTT/YSMenu R4 errcode=-4 will be fixing it now!
iluvfupaburgers
#3
i dont think there is any ap on this game. i just tried playing this on my acekard 2i with akaio 1.8.6a with ap bypass off, and no problems so far
Jonez001OP
#4
DStt has problems
Jhon 591
#5

Replying to #4

Wow what a record took me 10 Min's to fix for DSTT and YSMenu!Working and tested by myselfDSTT/YSMenu R45645 - Duke Nukem Critical Mass (EUR)GameCode: CDNPEncrypted GameID: 53BC490D <- extinfo.dat / infolib.dat useinfolib.dat / extinfo.dat
Spoiler

infolib.dat

00 00 00 00 00 00 00 00 3C E3 00 00 00 00 00 00
00 00 00 00 00 00 00 00 94 E3 00 00 B8 E4 00 00
00 E4 00 00 70 E5 00 00 00 00 00 00 F8 E5 00 00
30 E7 00 00 24 E8 00 00 0C 29 08 00 FF FF FF FF
A8 D6 08 00 FF FF FF FF FF FF FF FF FF FF FF FF
30 09 00 00 D8 FA 00 00 FF FF FF FF FF FF FF FF

extinfo.dat

0x02082900  00 0C A0 E1 21 04 80 E1 00 10 A0 E3

0x0233a1a8  04 4A BA 42 02 D1 80 22 92 00 BF 18 01 A2 17 60 4F 60 0D E1 FF FF FF FF FF FF FF FF

0x0233a3d4  0A 60 E7 E6

0x02339fa8  94 E8 3F 02

0x0233a2d8  85 42 3A E0

0x0233a228  B8 20 00 23 88 60 CB 60 01 4A 01 3B 13 60 01 E0 B8 E8 3F 02

0x023806B8  00 00 A0 E1

0xc2339e40  F8 B5 04 1C

0x02339e50  09 E0 55 4F

0x02339e70  4B 48 53 21

0x02339ed0  43 1C 03 E0

0x0233a50c  03 E0 00 21

0xd0000000
Post Merge: [time]1302112306[/time]
DSTT/YSMenu extinfo.dat / infolib.dat to be Replaced into TTMenu folderNew Link http://filetrip.net/f24736-DSTTYSMenuR4-extinfo-dat-infolib-dat-for-TTMenu-folder-updated-to-ROMs-number-5645-6-56-5.html
horsepower
#6
Not working: R4ultra with akio 1.8.1
iluvfupaburgers
#7

Replying to #6

specify what problem you have
Devilkid32176
#8
DSTwo
EOS 1.11 (latest update, i dont remember)
Problems: none right nowtested this game with a kingston 4gb micro SD + Sandisk 8gb micro SD
both were run on clean and patched mode with no problems on this end
Jhon 591
#9
Card: R4 Original
Firmware: Wood v1.28 for R4 Original/M3 Simply
Problem: Non
Works?: YesCard: R4 Original
Firmwire: YSMenu Updated to Roms 5645
Problem: Non
Works?: YesEmulators: No$gba though NO$Zoomer, Run through BIOS firmware.bin http://forum.romulation.net/index.php?topic=50586.0
Works?: Yes , Maybe slow at partsEmulators: DeSmuME 0.9.7
Works?: Yes, Maybe slow depending on hardware and settings
will1008
#12
Card: EDGE
Firmware: v2.2 (Gonna try it with 2.3, newly released)
Problem: First time I loaded it, graphical glitches. But the second time it works perfectly. The glitches may not have been caused by AP, they may have been caused by errors or something,
No white screen on EDGE v2.2. Most likely none, too, on v2.3.
Jhon 591
#13
DSTT/YSMenu R4 Updates new linkEDIT: Updated to ROMs 5646http://filetrip.net/f24736-DSTTYSMenuR4-extinfo-dat-infolib-dat-for-TTMenu-folder-updated-to-ROMs-number-5645-6-56-5.html
kerochan85
#14
Card: R4I sdch v1.2.1
Firmware: 1.35b for R4I
Problem: after the first cut-scene it stop work /black video
Works?: no
Kiekoes
#16
Works on R4iGold with the latest wood.
kerochan85
#17
Jhon 591 · #13DSTT/YSMenu R4 Updates new linkEDIT: Updated to Roms 5646http://filetrip.net/f24736-DSTTYSMenuR4-extinfo-dat-infolib-dat-for-TTMenu-folder-updated-to-ROMs-number-5645-6-56-5.html
don't know if it's the right place to say it but the link doesn't exist anymore... could you please write the new version so i can google it... I'm a newbie and this is the first time I'm using ttds
Jhon 591
#18

Replying to #17

New linkhttp://www.mirrorcreator.com/files/SX14HS3E/TTdT.exe__Eng0.1__Beta4___DATs_Upto_ROMs_Number_5671.rar_linksChangelog see the Unofficial DATs on this page http://forum.romulation.net/index.php?topic=43121.0If you are on TTDS are YSMenu for R4 then re-palce the dats extinfo.dat/infilob.dat/savlib.dat into the TTMenu folder of your firmware
Showing posts 1–18 of 18 · This discussion is archivedBack to top