Clone Acekard 2i????????

is my acekard 2i a clone?
But looking at everything from acekard.com my acekard is supposedly real.
i got the acekard 2i and i dont know if its a clone, because when i set up AKAIO 1.5 it says "loading" and then there is a black screen.
Supposedly it doesn't work for the clones so is my acekard a clone.what do i do?

Have you tried backing up your games/saves and formatting your MicroSD to start fresh with the AKAIO 1.5? Some other people said they had to do that to make it work.

yes before using AKAIO 1.5, i formatted it and installed brand new roms into the sd card.

My guess is that you may not installed akio correctly-to be stuck on the menu "loading" means you did something wrong.Remove all content from card (but back it up) and have but these 2 as you open it._akio (has all firmware contents for the card-avoid changing anything if your new)akmenu.nds (needed for seeing the menu)And when you place your roms back-but them in the same directory as these 2-not anywhere else.(BTW-the acekard 2.i is a real card-it's dsi compatible-there is also the 2 which is dodgy in make and the 2.1 which improves over the 2's faults-the 2.i is the same as 2.i but with dsi usage)

If all of that doesn't work, then you my friend have a clone and they are not supported with AKAIO.

yours is a clone in notes it blocks all clones sorry send back to reteller i hate poeple who sell phonny carts they sold me fake r4isdhc it olny works on 106b 1o8b not 109b .1.5 says in notes it will detect yours a clone if it dose that my works fine sorry companys that do that.for sure yours a clone read notes in firmware

You have the same problem like mine.Don't worry.Yours isn't the clone.Mine still working with V 1.4.1 although i'm still trying to figure out why i cannot use V 1.5

1.5 works for me if it dont work it says in notes you have a clone too.mine works fine

Try referring to http://wiki.gbatemp.net/wiki/index.php?title=AKAIO

mangekyo · #7You have the same problem like mine.Don't worry.Yours isn't the clone.Mine still working with V 1.4.1 although i'm still trying to figure out why i cannot use V 1.5

That would be because clones are not supported by AKAIO, as has already been stated.

How do we know it's a clone though?I never heard about clones for this-and if this was, it's not a clone-more or less a fake.Fakes look the same but don't work as welll,Clones use the brand name to sell.

Nemephosis · #10That would be because clones are not supported by AKAIO, as has already been stated.

but AKAIO 1.4.1 works perfectly fine with no glitches.

Replying to #12

1.5 must have a more accurate clone detection than the earlier versions.

theblues · #12but AKAIO 1.4.1 works perfectly fine with no glitches.

Yes, that is right. That has nothing to do with 1.5 because 1.5 does NOT support clone cards.If you downloaded 1.5, and the right loader, and it doesn't work, you have a clone. If you didn't, it would work right.Edit: Where did you get your flash card from, by the way?

Hi,somehow i find a way.Try disable the cheat code usage at system option.The game will load perfectly.If u decided to use the cheat, hold the 'x' button at LOADING screen.The game will still load.I don't know if there is any slow down to the game though.Tested with SanDisk 1gb SD.Games tested are Mario and Luigi Inside Bowser Story (Xenophobia) and Super Mario 64 DS.I don't know WHY.Someone have any ideas please share.Thanks

i bought my acekard out of a store in chinatown, ny
Called the guy and he says that they are all real.He says he got them from dealsextremeeverything looks good inside. ANd redownloaded the firmware more than once, so basically i dont know whats going on. I have AKAIO 1.4.1 working with out a problem only i cant get Animal Crossing Wild World to work, but other than that every game and aspect is fine.
For akaio 1.5, the screen says loading then suddenlt turns black. I got it to run the menu but when loading the game it freezes, must be a fault in the loader.whatever, another firmware will come out soon that i will be able to use

its tru you got clone like got milk i talked to firmware they said all be on 4.19 on next update fake and real will be fine .they confermed if it dont work on 1.5 you got clone so that is all folks i bought a fake r4i only works 108b nothing more i use it for patched roms enjoy

anyways since my card is a clone, then it is confirmed to be an r4. would it be a good idea to use AKAIo 1.4.1 and firmeware for the r4 together ??? Because i am trying to get Animal Crossing wild world to work.P.S. if it is a good idea, can some1 teach me how to use both firmwares!
And can you guys tell me if ACWW works on the R4.
Sorry, i'm new at this!!

well my i downloaded AKAIO 1.5 from here (gbatemp) when i went to unrar i got an error on one of the files saying it was corrupt (a font file i believe) and when i went to try it on my AK2i it did the same thing as you are describing when i downloaded 1.5 from a different site (cant remember the name) the download was fine and 1.5 is working on my ak2i as we speak

linefox domain for firmware