BREAKING News - SSSPwn 3DS Exploit - First Tastes of 3DS Homebrew!

BREAKING News - SSSPwn 3DS Exploit - First Tastes of 3DS Homebrew!Read up here - http://gbatemp.net/threads/breaking-news-ssspwn-3ds-exploit-first-tastes-of-3ds-homebrew.374233/

Now released.http://smealum.net/ninjhax/#qrcode

Congratulations! You’ve been lucky enough to get your hands on the Cubic Ninja title! Well, now that you have it, you have to follow the following instructions.
Go to this link, and enter the version of your Nintendo 3DS. The first box contains the letters O and N – O represents the Old Nintendo 3DS, and N is the New Nintendo 3DS. You can enter your console firmware version here, and select your region of usage, U, E, or J. If your console is too high up on the firmware indicators, just choose the highest version that the indicators allow. It will still work.
:arrow: QR Code generator
There will be a QR code that will pop up.
Place Cubic Ninja into your 3DS console, and boot it up.
You do not need to have progress on your save file. Press the A Button on the title screen – Create – QR Code.
Here is the tricky part. You will need to have Wifi enabled to do this, but the tricky part is to line up your camera to the QR code. You should be filling up the entire QR code in the camera box. If all goes well, you’ll see your screen glitch out and it will ask you to install the 3DS exploit. It definitely takes a bit of practice. Try different lightings if having trouble, or save the image to desktop and open it up in an image editor, and zoom in if you must.
Once you install it, congratulations, you will have access to the Homebrew Channel.
To add homebrew, you are allowed to remove your SD Card from within the menu, and you need to create a folder called “3DS” in the root of your SD card. For each homebrew game that you add, you need to create a special folder in the “3DS” folder, and title it the name of the homebrew application. For instance, to install 3DSCraft, you need to create a “3DSCraft” folder in the “3DS” folder, and rename the 3DSCraft file to boot.3dsx. Place the new boot.3dsx file into the 3DScraft folder, and reinsert the SD card. The Homebrew Channel will recognize it, and all should be well from here. However, if it fails, just reboot your system by holding the power key, and go back to step 5.
Or, you can just pick up the starter kit below and just extract it to the root of the SD Card.
Once it installs just go back to the QR code menu and it will start HB Channel automatically!

How to.http://gbatemp.net/threads/beginner-friendly-video-tutorial-ninjhax-homebrew-channel-install.374616/https://www.youtube.com/watch?v=wIVNy1cpyVs