Ak2i doesn't load anymore! Help please.

Ever since my Yu-Gi-Oh 5Ds Stardust Accelerator froze, I keep on getting this error message. It says : "An error has occurred. Press and hold the Power Button to turn the system off. Please see the Nintendo DSi Operation Manual for help troubleshooting." I'm using AKAIO and I haven't updated my system. Anybody know how to fix it? I think I might have "bricked" my card, even though yesterday it worked randomly sometimes.EDIT: I also tried removing the game and the save file from my flash card and it still doesn't work.I tried updating my AKAIO to the latest one, and it still doesn't work.I tried switching to using the Ak2 firmware, it still doesn't work.I had the All Cards Cheat, Max DP Cheat and No Ban List Cheat. These were made with R4CCE and Action Replay Codes.What I did prior to this problem : I was at the duel where you face the guy who's deck is called "sss sss ss!". Before I dueled him, I decided to remake my deck. it was called Dark Fiend and I was going to save over my old one but by accident, I pressed the A button twice and I declined. Then, the game froze. After that, my Acekard 2i wouldn't load sometimes. After I got it to work, I went to sleep. This morning, I tried to play again but I kept on getting the Error Message bolded up there no matter what I did.

I remember somebody on school has the AK2i With the offical firmware on his card , and getted on a day this message also when he turned the ds(i) on ..When he turned his DS On then Of te error was gone ..Do you have more than 1 ds at home ? Try the card on another DS maybe i't the ds . Or try the papertrick .
You need a small square of paper , put it on your MicroSD card and then put it in you Acekard 2i Spring slot loader .
Also try this on you Acekard 2i card , put a little bit of paper where the card sticker is and put it in your DS .

Replying to #2

For the paper trick, do I put it on the side with the words or the side with the metal stuff?EDIT: I tried putting my AK2i in my old DS, and the screen just stays blank after I load it.

Don't put pins in your dsi!I'm agaisnt this one even if it's worked in the past, it may damage the system...Try this.-Back up card contents
-Reformat the card
-Place contents back in
-Make the the card actually say's 2.i (the 2.1m doesn't work obviously...just a precaution)
-Make sure it's akio 1.5Or...there is a possibility of the acekard being a fake :(

Replying to #4

How do I reformat the card?

Replying to #5

Connect the card to your pc, copy all of the stuff out of it.Right click, properties, format.Make sure it's in fat32.

Replying to #6

I don't see format anywhere in properties.

Replying to #7

1. Put the card on you system
2. Back up your GAMES , not firmwares , only NDS and SAV files
3. then click on start , then on my pc , then you see some Disks (C:) (D:) . Find the right Disk that belongs to your SD Card , left click mouse , go to properties , en then you'l see Format .
Make sure it's in FAT32 , and don't fast format it may couse problems to your SD card
Click format .Download Akaio Here :
http://www.acekard.com/download/akaio/AKAIO.1.5.rarGet the lastest loader hear:
http://akaio.gbatemp.net/nloaders/211209/ak2loader.zipOpen the Aio Folder , go to Ak2loader folder and put that loader in that folder .
Copy the files to your clean SD CARD
First , check if it's working on your DSWorking ? Put the NDS And sav files on your card
And enjoy gaming :)

Re: Ak2i doesn\'t load anymore! Help please.

Replying to #8

It didn't work. Now what?
Post Merge: [time]1261441737[/time]

mds64 · #4Don't put pins in your dsi!I'm agaisnt this one even if it's worked in the past, it may damage the system...Try this.-Back up card contents
-Reformat the card
-Place contents back in
-Make the the card actually say's 2.i (the 2.1m doesn't work obviously...just a precaution)
-Make sure it's akio 1.5Or...there is a possibility of the acekard being a fake :(

The front of the card looks like this:

the new loader has to be put in the loaders folder, not the AK2 loaders folder, you find 3 loaders in there when you 1st open the loaders folder,delete these 3 loaders, and put the new loader in, i guess you are using the AKAIO still

Re: Ak2i doesn\'t load anymore! Help please.

Sabri23

I'm 100% sure I didn't update because only I use my DSi.
Post Merge: [time]1261490694[/time]

Replying to #11

I tried that, It didn't work. I'm starting to think that it's my card's problem.

Replying to #12

Again , wich firmware do you DSI USE ? Just click on system settings on your DS en then you'l see if you have 1.3E or 1.4E or someting else . Maybe you updates without knowing to 1.4E or someboddy in your family has messing up with your DSI.Just like this :
If there's 1.4 there's still hope .Ift its 1.3E you card may br broken :(

Replying to #13

I checked and it says 1.3U. I guess I'll have to use my old DS and my R4 now... Good bye cheats :(

your micro sd card could be almost dead